1.5mm thick and 200mm wide Polypropylene Fiber Woven Tape for metallic pipelines
1. Polypropylene fiber woven tape system description:
The Polypropylene fiber woven tape is cold applied tape for both metallic pipelines and waterproofing works against outdoor bad weathers .
The Polypropylene fiber woven tape shall be applied after the Liquid adhesive by hand or with a wrapping machine.
Waterproofing-
|
Pipelines protection
|
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
-Tough, high performance waterproof membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt
|
_ Weld joints
_ Bends
_ Fittings
_ Bare pipe lengths
_ Pipe rehab and repair
-Bare pipe length
|
2. Polypropylene fiber woven tape structures
The specification of the tape consists of three layers,
Adhesive layer: Butyl rubber Bituminous Compound
Backing : PP woven fabric cloth
Interleaf: Antiadhesive Film Treated with Silicone
3. Polypropylene fiber woven tape features
Waterproofing-
|
Pipes protection
|
-Cold applied.
-High resistance to bad weather environment
-Good performance itself to keep dry
-Easily application &installation.
-Suitable for a wide range of temperatures
- Compatible primers
-Safe,clean
|
_ Cold applied
_ Excellent self adhesion to pipe
_ Flexibility provides extra protection at vulnerable areas
_ Excellent conformability and consistent uniform thickness
_ Easily applied with no special equipment
_ Compatible with common pipe coatings
_ Excellent resistance to cathodicdisbonding
_Wider service temperature range
|
Polypropylene fiber woven tape physical Properties
Item
|
T 5100
|
T 5130
|
T 5150
|
T 5165
|
Total thickness (mil)
|
40mils
|
50mils
|
60mils
|
65mils
|
Tensile Strength (lb/in)
|
30(5kg/cm)
|
35(6.3kg/cm)
|
39(7kg/cm)
|
42(7.5kg/cm)
|
Elongation (%)
|
400
|
400
|
450
|
500
|
Length
|
25mtrs
|
20mtrs
|
15mtrs
|
10mtrs
|
Width
|
2“,4”,6”,9”
|
Peeladhesion To primed pipe (oz/in)
|
269(3kg/cm)
|
296(3.3kg/cm)
|
314 (3.5kg/cm)
|
340(3.8kg/cm)
|
To backing (oz/in)
|
90(1kg/cm)
|
90(1kg/cm)
|
117(1.3kg/cm)
|
135(1.5kg/cm)
|
Dielectric Strength (KV/mm)
|
42
|
42.6
|
43
|
43.8
|
Volume Resistivity (ohm·m)
|
2.5 X 1012
|
2.5 X 1012
|
2.5 X 1012
|
2.5 X 1012
|
Water Vapor Transmission Rate (g/ m2/24h)
|
0.06
|
0.05
|
0.03
|
0.02
|
Water Absorptivity (%)
|
0.1
|
0.1
|
0.1
|
0.1
|
Application Temperature (°F)
|
-31-+160 (-35-+70℃)
|
Max service temperature (°F)
|
-40-+250 (-40-+121℃)
|
|
|
|
|
|
|
About Us
l Xunda Groups:
Jining Xunda Pipe Coating Materials CO.,Ltd
Shandong Xunda Science & Technology CO.,Ltd
Shandong Xunda Anticorrosion Heat-Shirnkable Technology CO.,Ltd
We are the most largest manufacturers of Polyethylene Tape for the Corrosion Control of pipelines and specialty applications. A joint-stock enterprise, possessing a gross investment of RMB 42 million, registered capital of RMB 10 million.
l A Global company supplying Polyethylene Coating Systems to the corrosion industry within the oil, gas and water pipeline construction industry for both onshore and offshore applications.
l A manufacturer of standard and specialty products.
l High-quality anti-corrosion systems providing anti-corrosion solutions for oil pipelines, natural gas, chemicals and water transmission and distribution pipelines, etc.
l Global supplier of PE corrosion system for metallic pipelines